Instructions

NetTEST II Menu Guide

The PROFIBUS baud rate, address and slot time are necessary

for the parameterization of the installed PROFIBUS Master.

With these settings, the tests Generate livelist, Slave ident

number, as well as Slave signal quality are executed.

Moreover, indications regarding number of:

 Connectors (only number of 12 Mbit/s plugs!)

 Devices (all devices with PROFIBUS plug, or connected

cable)

Connected devices and 12 Mbit/s PROFIBUS plugs

considerable change by their inductivity resp. capacity the

measuring abilities and characteristics for the NetTEST II. In

order to keep these measuring insecurities in a tolerable scale,

please indicate before each measurement the number of

installed 12 Mbit/s plugs as well as the number of the devices

connected to the bus. Please only indicate the plugs which

dispose of incorporated direct-axis inductances. Devices stand

for all units connected to a bus segment. This applies to Master

and Slaves as well as to net components like segment couplers,

repeaters, optical couplers etc.

Once the data are stored in the data base, they can always be

used for new tests. The data in this data base cannot be deleted,

only changed by overwriting. In order to have enough spare

capacity for this function, 20 memory locations are available.

The respective memory locations can be reached by actuating

the or the key.