Instructions

NetTEST II Menu Guide
10 © KUNBUS
5.2.1.1 Segment list
Figure 5: Screen ‘Segment list’
Under Segment list, segment-specific data are stored serving as
basis for the following measurements. The data are stored in
the data base for line segments under the assigned segment
name. From there, they can be used as basis for both individual
tests and the creation of test protocols. Indications must be
made as to the points listed below:
 Name of line segment (max. 30 characters)
 PROFIBUS baud rate (9.6 Kbit/s - 12 Mbit/s)
 PROFIBUS address for master operation of NetTEST II
(0-126)
 PROFIBUS slot time tslot
(300-5000)
Figure 6: Screen ‘Segment configuration’