Instructions

DF PROFI II CPCI - Installation Instructions Installation of the Board

KUNBUS V1.7 / 27.02.2017 1
1 Installation of the Board
The DF PROFI II CPCI is a plug & play compatible board. The configuration entirely takes
place by means of the delivered software or the BIOS of your PC respectively. Thus, no
jumpers or DIP-switch adjustments are necessary.
To mount the board, please proceed as follows:
Please see also the operating instructions of your PC.
 Switch off the Compact PCI System and interrupt the power supply
 Select a free CPCI slot.
 Plug the DF board into the determined slot. Pay attention
to a proper adjustment of the board in the guidance (avoid canting!).
 Screw down the board.
Note: When mounting, please follow the safety instructions for
electronic modules against electrostatic charge.
The DF PROFI II CPCI does not support Hot Plugging. If installing/
uninstalling the board the Compact PCI system must be switched off and
the power supply must be interrupted.
Figure 1: DF PROFI II CPCI Board