Instructions

Gateway component for DeviceNetTM 23 / 38
Class Code 0x03 Hex
In this class you will find information about the configuration and
status of a DeviceNet port.
The gateway component supports the following functions in this
class:
Class Services
– Get Attribute Single (0x0e)
Instance Services
– Get Attribute Single (0x0e)
– Set Attribute Single (0x10)
– Allocate Master/Slave Connection Set (0x4b)
– Release Master/Slave Connection Set (0x4c)
The gateway component supports the following data in this class:
Instance 0
# Name Access Type Value
1 Revision Get UINT 0x2
Instance 1
# Name Access Type Description
1 MAC ID Get USINT Value range 0–63.
Default value: 63
You can set the MAC-ID on
the DIP switches.
2 Bitrate Get USINT Value Range
– 0: 125 kBit/s
– 1: 250 kBit/s
– 2: 500 kBit/s
– 3: Automatic bitrate detection
Default value: 125 kBit/s
You can set the bitrate on the
DIP switches.
3 BOI Get/Set BOOL Bus–Off Interrupt
4 Bus–Off
Counter
Get/Set USINT This value indicates how often
the module changes to the Off
state.
Value range 0–255
5 Allocation In-
formation
Get STRUCT
of:
You can find further informa-
tion in the DeviceNet specifi-
cations volume 3, in section
5.11.
Allocation
Choice Byte
BYTE
Configuration