User Guide
Table Of Contents
- 1. QUICK START GUIDE
- 1.1 Package Content
- 1.2 Required Tools and Equipment
- 1.3 Parts of a Kunak AIR Pro Station
- 1.4 Power On/Off Button
- 1.5 LEDs Indicators and Display Buttons
- 1.6 Installation of the Smart Gas Cartridge
- 1.7 Pluggable Probes or Extra Sensors
- 1.8 Checking Before Deployment
- 1.9 Location Selection
- 1.10 Installation to Mast or Wall Mount
- 1.11 Storage and Transportation
- 1.12 Kunak Cloud Account
- 1.13 Verification of the Correct Functioning
- 1.14 Getting help
Kunak AIR Pro – QUICK START GUIDE v.6
P. E. La Muga 9, 4º Ofic. 1, Orcoyen, 31160, Navarra, Spain +34 848 470 055 info@kunak.es www.kunak.es/en 3
1.3 Parts of a Kunak AIR Pro Station
Figure 1 – Parts of a Kunak AIR Pro
1. Inlet Particle sensor
2. Support holder
3. Outlet Particle sensor
4. Metallic grid
5. Solar Shield
6. External Temp, Humidity, pressure and dew point
sensors
7. Cartridge
8. Power button
9. Connectors for power and optional
probes
10. LCD display
11. Display Buttons
12. LEDs indicators
1.4 Power On/Off Button
Please note that the button cuts off all power to the device so that the gas sensors are no longer powered
and will have to be restabilised when powered on.
ON
Button pressed down. If it was already pressed down the power button, press the
sleep button to reactivate the device.
OFF
1. Hold down during 5 sec the sleep button and wait for the LCD indicators.
2. The LCD will show the messages before going to sleep and when the LCD is Off,
the device can be totally powered off by un-pressing the power button (button at
enclosure level).