User Guide

26
Status LED’s
There are two LEDs on the side of the relay that indicate the state of the relay, as shown in Table
1.
Table 1 - LED Status and Recommended Action
Red LED
Green LED
Relay Status
Action
Flashing
Off
Booting, not
connected
Wait 5 – 10
minutes for
system to
complete boot
process.
Solid
Off
Error, not
connected
Check Kumu ->
Alarms
Off
Solid
Connected
No action required
Off
Off
Not connected
Check power to
relay
System Alarms
Check Kumu -> Alarms to view current alarms, and suggested next steps.
If State = True then this is an active alarm. If State = False then the alarm condition has been
cleared.
The Message will give details on the alarm and possible next steps.
Last-set indicates how long since this alarm was last activated.
Last-clear indicates how long since this alarm was last cleared.