User Guide

19
Select IPv6 -> Status to check IPv6 LAN address configuration.
Figure 16 - IPv6 Status Screen
Advanced Settings
The KR5 Relay GUI allows advanced settings to be configured. These settings should only be
changed by qualified operators if required and are not necessary to configure for most normal
installations.
LTE Settings
Band Selection
Select LTE Network -> Cell Selection for advanced configurations including to limit bands used
for backhaul.
Use the Band options to enable/disable bands on the backhaul link. Note that Band 4 is not
supported by the current hardware and should not be enabled.
Other settings should not be used except as directed by Kumu personnel.
Figure 17 - Cell Selection Screen
Default PDN