User Guide

10
Figure 4 - KUMU Configuration Screen
Mandatory Settings
Set the DL Earfcn channel number that will be used by the small cell. If the small cell supports
multiple bands, enter the channel number for the Band 2 channel.
Set the UL Earfcn channel number that will be used by the small cell. If the small cell supports
multiple bands, enter the channel number for the Band 2 channel.
Setup eNB bandwidth. If the small cell supports multiple bands, enter the value from Band 2.
Default is 20MHz. Allowed values are 5MHz,10MHz or 20MHz
Setup TX Power for each of the eNodeB ports. Default/Max is 37 dBm each.
Setup Max TX Power for the UE. Default/Max is 23 dBm.
Other Settings
The Kumu Module Configuration Upload should not be used by vendor unless instructed by
Kumu personnel.
Leave KUMU module polling time setting at 2s unless instructed by Kumu
Heartbeat Configuration can be used to regularly ping an IP address to confirm connectivity. If
desired: