User's Guide

KUMI Mi 1
EnglishUser Guide
1
1 Foreword
Thank you for choosing this mobile phone –
you have made a wise choice,
congratulations!
Our cellular phones are approved for GSM
networks and meet stringent European
standards. Your phone may be
usedinternationally with various networks
depending on your roaming arrangements
with your service provider.
To use this phone you must subscribe to a
GSM service from a provider. We have
included many features in this device but
their function depends on the features
available with your subscribed wireless
network.
Please contact your service provider for more
information.
This User Manual is published by the
manufacturer without any warranty.Revisions
and improvements resulting from
typographical errors, inaccuracy of current
information, and improvements to the device
or software may be done without any prior
notification, but will be incorporated into
newer editions. More information and help
on your phone may be available at the
manufacturer’s website. The manufacturer
reserves all rights to the contents herein.
Copyrights and trade marks mentioned in this
document remain with their respective owner,
Reproduction, transfer, storage, or
distribution in whole or in part of
copyrighted materials without prior written
permission is expressly prohibited.We
strongly recommend you carefully read and
understand this manual before using your
phone in order to keep it under best
conditions for your effective usage and
utmost satisfaction.
2
2 Safety
Never attempt to disassemble your phone.
You alone are responsible for how you use
your phone and any consequences of its use.
As a general rule, always switch off your
phone wherever the use of a phone is
prohibited.Use of your phone is subject to
safety measures designed to protect users and
their environment.
Do not use your phone in damp areas
(bathroom, swimming pool…). Protect it
from liquids and other moisture.
Do not expose your phone to extreme
temperatures lower than - 10°C and higher
than + 55°C.
The physicochemical processes created by
chargers impose temperature limits when
charging the battery. Your phone
automatically protects the batteries in
extreme temperatures.
Do not leave your phone within the reach of
small children (certain removable parts may
be accidentally ingested).
3 Knowing the Keys
1. Left soft key/Right soft key: Implement
the functions shown in the lower left /right
hand corner.
2.Call/Answer (Green) Key
Press after dialing to connect.
Press if there is an incoming call to answer.
Press from standby to go to call records list.
3.End/Power key: Long press to switch
phone on/off; Press to end, reject call;
or to exit a menu.
4.OK key: Confirm or accept selection in
menu access.
Press from standby to enter the selected
shortcut function.
5.Navigator keys: Press the
3
up/down/left/right direction in menu to
scroll, browse or in edit page to move
cursor. In idle mode, press the
up/down/left/right direction keys to select
the shortcut function showed on the top of
the screen, and then press the OK key to
confirm.
6.1-9 alphanumeric keys: in standby mode
you can long press the key to call
corresponding number.
From Standby: Long press “2” to “9” key to
dial speed dial numbers (as defined in
the menu [Phonebook/Speed dial]).
Long press “0” start the SOS.
Press “+” to input “*” symbol for
international access in the dialing
interface.
7.＃(Pound) Key: long press from standby
to activate or deactivate silent and meeting
mode.
4Preparing Your Phone
4.1 Installing SIM Card
Beforeinstalling or removing the SIM card,
make sure the phone is switched off, and
remove the back cover and battery.
Note:Find SIM card's groove in the back of
phone and slide it completely there. During
installation, please make sure that the chip is
facing downwards and payattention to slot
direction.
4.2 Installing Memory Card
This phone supports the memory card
function. Please ensure the memory card is
inserted correctly before using.
Please be careful when using the memory
card, especially when inserting and
removing it. Some memory cards must be
formatted in PC before it is used for the
first time.
4
Please regularly backup information in the
cards on other equipment when you use
cards like T-flash!
Improper use or other uncertain factors
may cause the damage or loss to the
content in the cards.
4.3 Installing Battery
1.Align the battery chip with the metallic
salient point in battery jar, insert the battery
and press top of the battery downwards as
per the arrow direction until it is inserted into
the battery jar.
2.Slide battery cover into back of the phone
until it is locked.
4.4 Removing Battery
First switch off the phone and make it face
downwards, push the battery cover to top of
the phone, get its top and remove it.
Note: All settings or information stored in
SIM card and the phone may be lost when
the battery is removed.
Please remove the battery when the phone
is switched off, because it may suffer from
abnormity if you remove the battery when
it is switched on.
4.5 Charging Battery
insert one end of the charger, i.e., the
charging plug into attachment mode and the
other end into electrical outlet. If the phone is
switched on and the battery power icon
stripes in right hand of the screen are rolling,
then it is charging; if the stripes are full and
have stopped rolling, it is fully charged. If
the phone is switched off when charging, a
large charging sign will display in screen.
After charging is finished, just pull out the
plug.
Note: 1.When the battery is low; the phone
display will show a warning message.
Recharge the battery as soon as possible to
avoid inconvenience of the phone shutting
5
off during a call. Your phone will power
off automatically if the voltage becomes
too low. Prolong use of battery in low
charge state will adversely affect the
quality and life of the battery.
2. To ensure normal operations, please use
approved chargers.
3. Do not remove the battery when
charging.
4. Before you first use, please charge the
battery for at least 4 hours. It will achieve
maximum efficiency after several charge
and discharge cycles.
keyor press the Green key to make a call
when done to connect.
available under specific conditions):
4.6 Memory card
You can select the memory card with carious
capacities as required and read its content
only when inserted into the phone.
5 Menu functions
5.1Contacts
Stores and manages contacts that you often
use.
There are two locations where you can store
the names and numbers that you regularly
use, in the SIM memory and in the phone
memory. The volume of contacts can be
saved in SIM card depends on SIM capacity.
Enter the Phonebook list via the menu,
including all records saved in the phone and
the SIM card. There are different icons
before different records indicating its
memory location.
As you are browsing, you could enter a
character,or number and jump to contacts
whose names (as saved in the phonebook)
starting with or most closely matching with
the characters entered.
6
After searching for the name, pressthe
Call/Answer key to dial the number of
record, and press the End/Power keyto end
dialing. Pressthe OK key to view details of
the record, press the Left soft key [Options]
to access the menu options:
·Add new contact
This menu allows you to add the new record
to the SIM card or the Phone.
First you need to select storage: To SIM or
To Phone.
To SIM: Select this option, press the OK key
or pressthe Left Soft key[Edit] to enter name
input interface and input the corresponding
name, then press the OK key or pressthe
Left soft key[Options] to select ‘Done’ and
confirm.
Press the Navigator key to switch to number
column, enter the phone number directly and
confirm, finally pressthe OK key or the Left
soft key [OK] and confirm to save, adding
records to the SIM card will be done.
5.2Messages
5.2.1 Inbox
Received messages can be stored either in
phone or in SIM memory, and are accessed
here.
When you have received a message, the
tones or vibration (as defined in the menu
[User profiles/Profile
options/Customize/Tone setup/Message
tone]to alert you and message mark will also
be shown on the screen. Press the Left soft
key [Read] or the OK keyto read the new
message, press the Right soft key [Back] to
return, and you can access the inbox to read
the new message.
If the message memory is full, the indication
“Memory full” and the message icon will be
shown on the screen and flashed. Before you