Datasheet

Weight:
Complete
solenoid: appr. 60 g
Armature: appr. 12 g
Standard:
Voltage: 24 V DC
Flying leads: 10 cm
Thermal stability: B (max. permissible
temperature = 130 °C)
Insulation group
according to: VDE 0110 C 300
Test voltage: 800 V (eff)
Service-free armature bearing (plain
bearing) for maximum durability.
Solenoids with order specification RM20-
R-... are available with return spring
F (0 mm) approx. 1.2 N and F (3 mm)
approx. 0.5 N.
Force vs. Stroke diagramm F = f (s)
Force measured when operating in horizontal
position, at 90 % rated voltage and with winding at
operating temperature
stroke s = 0 corresponds to armature in
fully home position
Gewicht:
Magnet: ca. 60 g
Anker: ca. 12 g
Standard:
Spannung: 24 V DC
Litze: 10 cm
Thermische
Klasse: B (T
grenz
= 130 °C)
Isolationsgruppe
nach: VDE 0110 C 300
Prüfspannung: 800 V (eff)
Wartungsfreie Ankerlagerung
(Gleitlager) für höchste Lebensdauer.
Die Magnete mit der Bestellbezeichnung
RM20-R-... sind mit einer internen
Rückholfeder F (0 mm) ca. 1,2 N
und F (3 mm) ca. 0,5 N ausgeführt.
Kraft-Weg-Diagramm F = f (s)
Kraft bei waagerechter Bewegungsrichtung und
bei 90 % Nennspannung und betriebswarmer
Wicklung
Hub s = 0 entspricht dem angezogenen,
bestromten Zustand
Hochleistungs-Hubmagnet
RM 20
Stoßende und ziehende Ausführung
Heavy Duty Linear Solenoid
RM 20
Thrust and pull type
KUHNKE Magnetkatalog 01/10
110
KUHNKE Solenoid Catalogue 01/10
Bestellformel RM 20 – R – – F – 24 V DC 100 % ED Order specifications
Hubmagnet
Bauart
RM
20
Linear solenoid
Design type
Rückholfeder
Anschlussart
Nennspannung (Standardspannung)
1)
Litze (Standardlänge 10 cm)
R
F
24
Return spring
Coil terminals
Nominal voltage (standard voltage)
1)
Flying leads (10 cm standard length)
Zulässige relative Einschaltdauer bei Luftkühlung (LK) 100 % ED Perm. duty cycle under air cooled conditions (LK)
1)
Die Magnete sind auf Anfrage bis 60 V DC
lieferbar
1)
Other voltages are available on request up to
60 V DC
Zul. rel. Einschaltdauer (ED)
2)
% 100 45 25 15 5 % Perm. duty cycle (ED)
2)
Nennaufnahme P
n
Anzugszeit (ED)
W
ms
3,9
11
8 13,5 21 59
5
W
ms
Nominal coil power P
n
Actuation time (ED)
2)
Bei Montage auf eine Kühlfläche ist eine höhere
ED zulässig (bitte anfragen)
2)
If solenoid is mounted directly onto a flat metal
surface, an increase in relative duty cycle is
permissible (please ask for advice)
0123
s/mm
F/N
1
2
5
100
%ED
100
45
25
15
5
10
20
50
Ø20
Ø12
Ø16
SW14
66,5
M3
28
8
+1
12
7
8
+1
8
2
M3
M6
Maße im bestromten Zustand
–––––––>
Hubrichtung
Dimensions given with armature in fully
home position
–––––––>
Direction of stroke