User Manual

Operation steps
 Power button function description
1. Power on/off
Power on/off: Long press the red button on the right side to turn it on,
Long press again to turn it off.
2. Gear switch
Gear switch：Short press the left red button , the system can be switched among L-M-H three
gears
3. Lighting
Turn on/off: In the state of power-on, a short press on the right key can turn it on/off
4. Setting status
Long press the key and the key at the same time to enter the “Settings” interface. In the
setting state, short press they key to switch between C1(unit)---C2(Startup mode)---C3(cruise
control).
a) Unit settings
Switch to C1 state in the “Settings”state: Short press button to switch between KM/H and
MP/H
b) Startup mode setting
Switch to C2 state in the “Settings” state: Short press button to set the start mode of the
scooter (Slide start/Zero start)
c) Cruise control setting
Switch to C3 state in “Settings” state: Short press key to set turn on/off cruise control
 Safe Driving
1. Avoid accentuating the body while accentuating or decelerating and do not keep the body
weight on the handle
2. Riding a standing position, please keep the two feet one after the other, so that riding more
stable, and easy to step on the rear brake
3. Keep your body and handle parallel when turning. Please confirm the road condition before
turning and keep safe.
4. Brake - when braking, please shift your body weight back. You’d better learn to control your
body’s center of gravity when you brake. Otherwise, it will cause two situations:
1
Scooter forward, causing personal injury.
2 Braking and steering system damage.