Instruction Manual

14 Software
1
Figure 9: Software
Table 7: Notes for the software
Nr. Work step Note
For the commissioning, our Sound Booster Software for PC / Mac should be used.
Step 1: Download the appropriate software via the followi ng link: https://www.
sound-booster.com.
Step 2: Turn the ignition of the vehicle on and only t h en connect the PC / Mac
with a USB cable with our module. It is i mportant here to make sure previously
that plus and minus are connected correctly. If this is not the case, a damage at the
computer or at the control unit can result.
Step 3: Start the downloaded software and first click on search and afterwards on
connect.
1 You will be forwarded automatically to the diagnosis side, on which you can see the
following things at a glance:
Software: Software version / creation date
Active profile: The actually activated profile is indicated here.
Vehicle: The automatically identified vehicle i s ind i cat ed h er e.
System Status: You can see here if the connections are correct.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 14