Instruction Manual

12 Routing connecting cable sound generator
1
2
2
3
3
3
Figure 7: Routing connecting cable sound generator
Table 5: Routing connecting cable sound generator - instructions
Nr. Work step Note
1 Route the connecting cable for t he sound generator from the dashboard to th e sill
trim.
2 Route the cable furth er from the sill trim beneath the dri ver’s seat with a pull
through aid. Move the seat to the very front for thi s.
3 Guide the conne ct i ng cable through the marked grommet under the seat to th e
underbody.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 12