Instruction Manual

18 Software
1
Figure 12: Software
Table 10: Notes for the software
Nr. Work step Note
1 If the system does not work after you have ins tal l ed eve ry t h i ng, please check by
hav i ng a look on to the following Link : https://www.sound-booster.com/en/
debugging.html if everything is c orr ec t as described. For the f ur t h er commissioning
or debugging, our Sound Booster Software for PC / Mac should be used:
Step 1: Download the appropriate software via the following link: https://www.
sound-booster.com.
Step 2: Turn the ignition of the vehicle on and only then connect the PC / Mac
with a USB-cable with our module. It is important here to make sure previously
that plus and minus are connected correctly. If this is not the case, a damage at the
computer or at the control unit can result.
Step 3: Start the downloaded software and first click on search and afterwards on
connect.
You will be forwarded automatically to the diagnosis side, on which you can see the
following things at a glance:
Software: Software version / creation date
Active profile: The actually activated profile is indicated here.
Vehicle: The automatically identified vehicle is indicated here.
System S tat us : You can see here, if the connections are correct.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 18