Instruction Manual

13 Cable routing steady plus to passenger’s side
1 1
2
3
3
Figure 7: Cable routing steady plus to passenger ’ s si de
Table 5: Instr u ct i ons f or the cable r out i ng ste ady pl us to passe nge r’ s si de
No. Work step Note
1 Please route the red/white cable for ignition plu s ( cl amp 15) from the driver’s
footwell to t he centre console in the direction of the handbrake lever.
2 Route the cable from the centre console into the footwell on the passenger’s side.
3 Loosen the covering of the passenger’s footwell by pulling the carpet out, then you
can see the bo dy control unit, which is positioned behind the carpet.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 13