Instruction Manual

12 Disassembly of the wheel house covering on driver’s side
1 2
3
3
33
3
Figure 6: Disassembly of the wheel house covering on dri ver’s side
Table 4: Instr u ct i ons f or the disas se mbly of the wheel house covering on driver’s side
No. Work step Note
1 Loosen the screws at the rear wheel on driver’ s side and re move it. 5xM12
2 Loosen and remove the two marked scre ws at the wheel hous e covering. 2xM6
3 Afterwards loosen and remove 14 marked clips by using an assembly lever. The clips
can easily got broken and can only be used once.
14x clips
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 12