Phau Ntawv Qhia

1
2
3
3
Figure 9: Assembly sound generat or
Table 7: Instructions to assemble the sound generator
No. Work step Note
1 Remove the marked rubber grommet and pull the connecting cable for the sound
booster through it.
2 Now ins tal l th e sound booster with th e scre w you r em oved before. 19er Nut
3 Afterwards close the crash protection with the rubber grommet and waterproof it
additionally.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 15