Phau Ntawv Qhia

14 Assembly sound generator
1
2
3
4
1 2
3
4
5
6
Figure 8: Assembly sound generat or
Table 6: Instructions to assemble the sound generator
No. Work step Note
1 Release the screw of the clamp at the marked position. E14 Star
Key
2 Release the sensor of the middle sound absorber. 17er
3 Remove th e sensor of the exhaust pipe between end sound absorber and middle
sound aborber.
20er
4 Release and remove the screws for the exhaust mounting. Afterwards the exhaust
pipe can be removed.
13er Nut
5 Remove the heat protection plate by loosen the indicated screws. 8er Nut
6 Loosen the marked screw at the crash protection. 19er Nut
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 14