Phau Ntawv Qhia

13 Assembly button / Laying sound generator cable
1
2
3
3
4
4
Figure 7: Assembly button / Laying sou nd ge ne rat or cabl e
Table 5: Instructions to assemble the button / lay the sound gener at or cabl e
No. Work step Note
1 Remove the lower dashboard cover by loose n th e marked screws.
2 Route the sensing device cable upwards to the car dashboard and drill a hole for
the sensing device at the marked positon . Afterwards the sensing device c an be
installed.
3 Use a pull throu gh aid to pull the connecting cable for the Sound Booster underneath
the carpet towards the driver’s side and continue routing it behind the side covering
into the trunk.
4 Remove the lateral trunk covering at the driver’s side and continue to r oute the
connecting cable. Afterwards route the c abl e through the car protective sleeve down
to the underbody.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 13