Phau Ntawv Qhia

1
2
1
2
Figure 5: Connection cable set
Table 3: Instructions to connect the cable set
No. Work step Note
1 Pull the control unit out fr om under the carpet and connect CAN High/Low as
follows (green/white and green twisted cables):
CAN High (bl ack/white) to green/white (cable color at plug)
CAN Low (black/yellow) to green (cable color at plug)
Isolate the connection professionally afterwards.
2 Lift the carp et at the marked spot up carefully and connect the ground cable
(brown) to the ground pin located underneath.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 11