Phau Ntawv Qhia

11 Connection cable set
1
2
2
3
3
4
Figure 4: Connection cable set
Table 2: Instructions to connect the cable set
No. Work step Note
1 Flip the back seats upwards.
2 Underneath t h e back seat fold the carpet aside to uncover the fuse case. Now remove
the covering of the fuse box.
3 Look for an ignition plus slot by using a multimeter (blue or wine-red fuse holder).
Remove the fuses from the fuse holder as well as the relays beside it. Please note
from which plug-in position you have removed whi ch fuse or relay.
4 Unlock the fuse holder, pin the cable for ignition plus (red/white) into the slot from
behind and secure it afterwards by using a 7,5A-fuse.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 10