Instruction Manual

10 Removing sill trim / connection ground
1
2
3
4
4
Figure 4: Removing sill tri m / connecti on groun d
Table 2: Removing sill trim / connection ground - instructions
Nr. Work step Note
1 Remove the marked plastic cli p as well as the marked screw of the seat bel t . 1xT50
2 Loosen the marked trim panel at the bottom at the a-pillar on the passenger’s side
using a trim tool.
3 Loosen the entire sill trim on the passenger’s side with a trim tool and take it out.
4 Connect the ground cable (brown) to the marked ground spot at the bottom at the
sill trim.
1x10er
socket
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 9