Instruction Manual

14 Installation / connection sound generator
1
1
2
2
3 4
Figure 8: Installation / connection sound generat or
Table 6: Installation / connection sound generator - instructions
Nr. Work step Note
1 Pull the connecting cable out from behind the heat protection plate.
2 Loosen the marked screws of th e exhaust bracket and attach the sound generator
with these screws afterwards.
2x13er
socket
3 Connect the connecting cable to the sound generator.
4 Mount the steel wire rope at the sound generator as well as at the exhaust bracket.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 13