Phau Ntawv Qhia

10 Removing trim panel driver’s side / connection CAN High & Low
1
2
3
4
5
5
Figure 4: Removing trim panel dr iver’s side / connection CAN High & Low
Table 2: Removing trim panel driver’s side / connection CAN High & Low - instructi ons
Nr. Work step Note
1 Remove the lateral covering of the dashboard using a trim tool.
2 Loosen and remove the sill trim using a trim tool.
3 Loosen the trim panel of the a-pillar with a trim tool.
4 Loosen the marke d scre ws of the lower trim panel of the dashboard. 3xT25
5 Connect CAN High & Low to the plug of the central gateway as foll ows:
CAN High (black/white) to pin 8 (green/white)
CAN Low (black/yellow) to pin 7 (green)
If our cable set consists exclusively of grey wires, connect the wires according to the
cable inscription at the end of the wires.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 9