Phau Ntawv Qhia

18 Cable routing to the underbody
1
1
2
3
4
Figure 12: Cable routing to the underbody
Table 10: Cable routing to the underbody - instructions
Nr. Work step Note
1 Pull the connecting cable further through in the trunk.
2 Route the connecting cable behind the lateral trim panel down to the spare wheel
recess.
3 Pull the connecting cable further through and guide it through the marked grommet
to the underbody.
4 Pull the cable further through and guide it behind the heat protection plate in the
wheel housing.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 17