Phau Ntawv Qhia

16 Cable routing to the trunk
1
2
3
4
5
Figure 10: Cable routing to the trunk
Table 8: Cable routing to the trunk - instructions
Nr. Work step Note
1 Guide the connecting cable for the sound generator behind the center console to the
passenger’s side using a pull through aid.
2 Pull the connecting cable further throu gh and route it to the a-pillar on the passen-
ger’s side.
3 Route the connecting cable along the sill trim to the b-pillar.
4 Pull the connec ti n g cable out from behind the trim pane l of the b-pillar and route
it up along the marking.
5 Guide the connecting cable over the wheel housing in the trunk.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 15