Phau Ntawv Qhia

13 Installation pushbutton / placing control unit & module
1
2
3
Figure 7: Installation pushbutton / placing control unit & module
Table 5: Installation pushbutton / placing control unit & module - instructions
Nr. Work step Note
1 Connect the control unit and the module and place it at the marked position in the
center console.
2 Drill a hole for the pushbutton at the marked position. 7mm
3 Now ins t al l the pushbutton at this position.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 12