Phau Ntawv Qhia

20 Installation sound generator
1
1
2
3
Figure 14: Installation sound generator
Table 12: Installation sound generator - instructions
Nr. Work step Note
1 Loosen the marked screws of the exhaust bracket as well as of th e lateral bracket of
the bumper.
2x10er
socket
2 Afterwards install the sound generator with the just loosened screws. 2x10er
socket
3 Connect the connecting cable to the sound generator and at t ach the steel wire rope
to the vehicle as well as to the sound generator.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 19