Phau Ntawv Qhia

19 Removing trim panel underbody
1
2
3
Figure 13: Removing trim pane l unde rbody
Table 11: Removing trim panel underbody - instructions
Nr. Work step Note
1 Loosen the marked screws of the lower covering. 3x8er
socket,
1x10er
socket
2 Now remove the two marked screws of the covering at the u nd er body in the wh ee l
housing and take the covering out afterwards.
2x8er
socket
3 Pull the connecting cable of the sound generator further through.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 18