Phau Ntawv Qhia

17 Routing cable set to the underbody
1 2
3
3
Figure 11: Routing cable set to the underbody
Table 9: Routing cable set to the underbody - instructions
Nr. Work step Note
1 Guide the connecting cable for the sound generator through behind the trim panel.
2 Route the connecting cable along the marking to the driver’s side in the trunk.
3 Now guide the connecting cable for the sound generator with a pull through aid
through the marked grommet to the underbody.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 16