Phau Ntawv Qhia

16 Routing cable set
1
2
3
4
5
Figure 10: Routing cable set
Table 8: Routing cable set - instructions
Nr. Work step Note
1 Route the connecting cable of the sound generator as well as for ignition lead along
the front sill trim to the b-pillar.
2 Pull both wires out from under the trim panel of the b-pillar and route them along
the marking up to the c-pillar.
3 Now guide the connecting cable for the sound generator with a pull through aid
behind the side trim panel in the trunk.
4 Pull the connecting cable out from behind and route it down to the covering.
5 Guide the connecting cable along under the covering to the trunk sill protection.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 15