Phau Ntawv Qhia

15 Installation pushbutton
1
2
3
4
5 5
Figure 9: Installation pushbutton
Table 7: Installation pushbutton - instructions
Nr. Work step Note
1 Loosen the marked screws of the lower trim panel of the dashboard. 2x10er
socket
2 Loosen the lower c overing using a trim tool and pull it down careful l y.
3 Guide the cable for the pushbutton behind the center console to the driver’s side
using a pull through aid.
4 Pull the cable for the pushbutton out from behind the center console.
5 Drill a hole for the pushbutton at the marked position and install it afterwards. 7mm
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 14