Instruction Manual

10 Removing coverings drivers side
1
2
3
4
5
6
Figure 4: Removing coverings drivers side
Table 2: Removing coverings drivers side - instructions
Nr. Work step Note
1 Remove the lateral covering of the dashboar d usin g a trim tool.
2 Remove the covering of the fuse box.
3 Remove the front door sill tri m usi ng a trim tool.
4 Pull the bonnet release lever backwards and then sideways out.
5 Remove the lower A-p i l l ar cover using a trim tool .
6 Remove the rear door sill trim using a trim tool.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 9