Instruction Manual

16 Important Information Sound Booster
Please use for the fixation of the Sound Booster suitable high tensile screws. In order to avoid
losening of the screws by vibration please make the screws safe with appropriate factory material e.g
Threadlock. Please addit i on all y check the stability of the Sound Boos t er re gul arl y an d if neces sar y
retighten the screws. In case of no consideration we do not assume li abi l ity for p oss i bl e damages .
After successful installation we recommend to cover the sou n d generator with a zinc spray. Make sure
that you cover the open i ng of the sound gener at or so that no zinc spray can’t get inside the sound
generator.
As additional safety the delivered steel cable and the retainin g cli ps h ave to be tightened on the
Sound Booster as well as at a suitable position in the car. This safety cable is an additional security
should the tightening screws should be released by vibration.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 15