Instruction Manual

14 Cable routing
1
2
3
4
5
Figure 8: Cable routing
Table 6: Cable routing - instructions
Nr. Work step Note
1 Lay the connecting cable for the sound generator along the door sill trim to the
B-pillar.
2 Lay the connecting cable along the rear door sill tri m and us e a pul l through aid to
push it behind the side trim.
3 Lay t he cabl e along behind the side trim and pull it out at the marked spot.
4 Remove the marked rubber gr omme t from the t ru nk floor.
5 Lay the cable to the marked opening and lead it down to the underbody. Now seal
the opening waterproof.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 13