Installation Guide

16 Installation sound generator
1
1
2
3
4
Figure 10: Installation sound generator
Table 8: Installation sound generator - instructions
Nr. Work step Note
1 Pull the connecting cable for the sound generator through the grommet to the un-
derbody with a pull through aid and waterproof the grommet afterwards.
2 Loosen the two marke d screw s of the impact pr ot ect i on . 2x13er
socket
3 Afterwards attach the sound generator with the just loosened screws. 2x13er
socket
4 Connect the connecting cabl e to the sound generator and attach the delivered steel
wire rope to the sound generator as well as to a suitable point at the under body.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 15