Installation Guide

15 Routing connecting cable sound generator
1
2
2
2
3
3
Figure 9: Routing connecting cable sound generator
Table 7: Routing connecting cable sound generator - instructions
Nr. Work step Note
1 Route the connecting cable for the sound generator along the s il l trim to the b-pillar.
2 Guide the cable with a pull through aid behind the trim panel in the trunk.
3 Pull the connecting cable out from behind and route it th rou gh the trunk to the
marked grommet behind the battery.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 14