Installation Guide

14 Removing cover parts trunk
1
3
3
Figure 8: Removing cover parts trunk
Table 6: Removing cover parts trunk - instructions
Nr. Work step Note
1 Remove the trunk sill protection using a trim tool.
2 Take the trunk floor out afterwards.
3 Loosen the plugs from the cabriolet control unit (if exist in g) and take the inserts
out of the trunk by pulling them sideways up.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 13