Phau Ntawv Qhia

17 Installation sound generator
1
2
1
2
3
4
5
Figure 10: Installation sound generator
Table 8: Inst al l at i on sou nd gener at or - inst ru ct i ons
Nr. Work step Note
1 Loosen the three marked screws at the underbody. 3x10er
socket
2 Remove the marked covering by loosening the four marked screws. 2x8er,
2x10er
socket
3 Loosen the two marked screws at the underbody. 1x13er,
1x16er
socket
4 Afterwards install the sound generator with the just loosened screws. 1x13er,
1x16er
socket
5 Connect the connecting cab le to the sound generator and attach the delivered steel
wire rope to the sound generator as well as to a suitable position at the vehicle.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 16