Phau Ntawv Qhia

13 Installation pushbutton
1 2
2
3
Figure 6: Installation pushbutton
Table 4: Inst al l at i on pu shbutton - instructions
Nr. Work step Note
1 Remove the lower trim panel of the dashboard in the driver’s footwell. For this,
loosen the two marked screws.
T20
2 Now guide t he pushbutton into the dri ver’s fo otwell with a pull thr ough aid .
3 Drill a hole for the pus hbutton at the marked position and mount the p u shbutton
afterwards.
7mm
drill
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 12