Phau Ntawv Qhia

13 Assembly sound generator
1
2
3
3
Figure 7: Assembly soun d gene rat or
Table 5: Instructions for the assembly of the sound generator
No. Work ste p Note
1 Lead the cable through further t o the sound generator and fix the sound generator
at the rear gear holder by fastening the two screws according to the marking.
2xM8
T30
2 The heat plate must be adapted to the sound generator with appropr iat e factory
material.
3 Please fix the included steel cab l e at t h e gear hol d er and t h e sound generator and
finally join the sound generator with the routed cable before.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [e-mail] 12