Phau Ntawv Qhia

8
You can see the routing to the external sound generator in fig. 6 and 7. Guide the cable through the
grommet outwards. Ensure a waterproofing.
Fig. 6 Fig. 7
Install the external sound generator at the longitudinal beam rear left, fig. 8, and at the bumper, fig. 9,
and connect it with the just routed cable, fig. 10.
Fig. 8 Fig. 9
Fig. 10
Please use for the fixation of the Sound Booster suitable high tensile screws. In order to avoid
loosening of the screws by vibration please make the screws safe with appropriate factory
material e.g. threadlock. Please additionally check the stability of the Sound Booster regularly
and if necessary retighten the screws.
In case of no consideration we do not assume liability for possible damages.