Phau Ntawv Qhia

7
Remove the trim panels at the dashboard, fig. 1. In the next step begin the cable routing from the a-pillar
on the driver’s side to the rear left, to the external sound generator. For this, remove the front sill trim
which is attached with clips, fig. 2.
Fig. 1 Fig. 2
Afterwards the trim panel of the b-pillar, fig. 3, and lift the rear sill trim, fig. 4. Route the cable under the
trim panels according to fig. 2 and 4 in the direction of the trunk.
Fig. 3 Fig. 4
Afterwards remove the trim panel in the trunk on the left, fig. 5. Route the cable according to the arrow
behind the trunk trim panel.
Fig. 5