Instruction Manual

9
Install the control units with suitable workshop material in the area of the a-pillar in the driver’s footwell,
fig. 11. Afterwards connect the ground cable (brown) to the ground spot. It is located in the footwell
under the just installed control units at the a-pillar, fig. 12.
Fig. 11 Fig. 12
Connect the wire for ignition plus (red/white) with the free fuse spot no. 48, fig. 13. Protect the wire with
7,5A afterwards. Check the correct connection to ignition plus with a voltmeter!
Fig. 13
As additional safety the delivered steel cable and the retaining clips have to be tightened on the Sound
Booster as well as at a suitable position in the car. This safety cable is an additional security should
the tightening screws should be released by vibration.