Instruction Manual

Antenna
Connect the antenna plug to the unit.
Power supply
The connection of the power supply takes place with the Quadlock-plug of the radio box.
The wires Brown (ground) and Red (permanent positive) have to be connected by means of a
braze or a new crimp joint specifically to the vehicle (fig. 19, 20).
BROWN - PIN17
RED - PIN 18
CAUTION: Do not use press-on connectors !
NOTE: The wire color can also be neutral (gray). If this is the case, then please consider the wire
imprint.
Fig. 21 Fig. 22
After the connection please carry out sufficient functioning tests. When the tests are successful then as
next assemble everything in the backward sequence.
11