Instruction Manual

Interface connection MMI 3G/ MMI 3G+

Light conductor

The connection takes place through Plug & Play on the back side of the radio box.

Remove the original light conductor plugs from the radio box (fig. 14). Connect the original light

conductor plug with the socket of the delivered cable harness (fig. 15).

Fig. 16 Fig. 17

Integrate the light conductor of the delivered cable harness in the radio box (fig. 16). The figure 17 shows

the correct connection of the interface.

Fig. 18 Fig. 19

Connect the 18-pin plug and the light conductor plug to the interface (fig. 18).

Fig. 20