User Manual

FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
INSTALLATION GUIDE AND USER MANUAL
Trouble shooting Tips
Symptom
Possible Cause
Solution
BURNERS WILL
NOT
LIGHT.
Burner parts or
Igniters maybe
wet,dirty or
misaligned.
Check that t he burner parts are clean,dry
And correctly assembled.Check that the
igniters ar e clea n and dry.
TOP BURNER WILL
NOT STAY LIT
Failed
Thermonuclear
Replace thermocouple
FLAMES DO NOT
BURN ALL
AROUND THE
BURNER CAP.
Burner parts
Maybe dirty or
misaligned.
See“Care an d Cleaning”instructions.
BURNER FLAMES
ARE VERY
LARGE AND
YELLOW.
Burner bezel
Ports are
clogged.
Burner ports or
burner caps are
not positioned
properly.
Range top is
being operated
with the wrong
type of gas.
Regulator is not
installed,is
faulty,or is set
for the wrong
type of gas.
Clean burner be zelring ports with
Straightened paperclip,needle,or wire.
Remove and carefully re
‐
install burner
bezel and c a ps.
Ensure that the type of range top matches the
gas supply.
Check installation,replace r e gulator,or set
regulator for proper gas.
IGNITERS ARE
SPARKING BUT
BURNERS ARE
NOT IGNITING.
Gas shut
‐
off
Valve is in the
“OFF”position.
Turn s hut
‐
off valve to the“ON”position.