Installation Guide

FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
INSTALLATION GUIDE AND USER MANUAL
Before installing the hood
1. To ensure the most efficient ventilation possible, install the pipe in a straight line or with
the least elbows possible.
CAUTION: The output of the vent pipe should give to the outside.
2. Two people are required for installation.
3. Supplied hardware can secure the hood to most walls and ceilings, consult a qualified
installer to ensure that the hardware provided is suitable for your type of wall or cabinet.
4. In the case of areas prone to COLD WEATHER, install a check again
st extra-circulation
to minimize the cold air return and a nonmetallic thermal break to minimize conduction of
outside temperature in the duct. The valve must be placed on the side of the cold air from
the heat insulator. The insulation must be placed as close as possible to where the pipe
enters the heated part of the house.
5. Air booster: The building code in your area may require the use of a make-up air system
if you use a ventilation system which leads the movement of air exceedin
g a certain
number of CFM. The number of ft3/min varies from one region to another. Consult your
HVAC professional for specific requirements in your area.
Remove the packaging.
CAUTION: Carefully remove the cardboard, gloves to protect against sharp edges.
Examples and positioning possibilities ducts
Follow the letter of the guidelines presented in this manual.
The manufacturer declines any liability with respect to any loss, damage or fire caused by
non-observance of the instructions contained in this manual.
Ventilation methods
The hood is equipped with a ve
rtical transition to remove fumes outside.
Recommended diameter conduit model and wall chimney hood and hood island: vertical
round pipe 7'' tolerance + or – 1.
Models Chimney hood Wall: 03 series and 04 series