Installation Guide

FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
INSTALLATION GUIDE AND USER MANUAL
Time-delay Button: Power on, press any button of F2/F3/F4, fan starts and F5 light
automatically but does not blink.
Press F5 again, time-delay function starts, when F5 indicator light starts to blink,
time-delay function unadjustable,
default setting time is 5 minutes. Press F5 button again, time-delay and fan both close,
LED light still on, which is independent switch.
MAINTENANCE
WARNING
Before servicing or cleaning unit, switch power off at service panel and lock in access to
prevent it being
switched on accidentally. If the power panel can not be locked, put a
prominent warning device, such as a brightly colored label.
Grease filters
The grease filters should be cleaned once a month or as needed. To remove grease filter,
pull the metal latch down. This will disengage the filter hood. Tilt the filter down, then
remove. To clean the filters, use a solution of warm water and detergent. Let them dry,
then re install. The metal filters are dishwasher-safe. Clean filters made entirely of metal in
the dishwasher u
sing a non-phosphate detergent. Using a detergent containing
phosphates and local water conditions may cause discoloration of the filters, without
affecting their performance. This discoloration is not covered under warranty.
Hood Cleaning
Cleaning stainless steel: how to keep his "lustrous appearance" and help prevent
corrosion.
What to do:
- Wash surfaces regularly with a cloth or a clean cloth soaked in warm water and mild
soap or dish detergent.
- Always clean in the direction of squall lin
es (direction of the grain).
- Always rinse well with clear water (2 or 3 times) after cleaning and dry completely.
- A household cleaner designed for stainless steel can also be used.