Installation Guide

FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
INSTALLATION GUIDE AND USER MANUAL
setting is 1minute,after that, will shut off automatically.
During fan working, if you need to adjust time-delay function,press A4 button one time, will
blink for a few seconds, press A6
button to increase delay-time, set the figure timers as the time you want, max delay-time is
15 minutes.
If time-setting changes from A6 button to A5 button, during the process, speed
changes,but does not affect count down.
Off immediately
Press A1 button two times, fan turn off immediately.
Bulb control
Press A2 button
once, turn on the lights, and again to turn off.
Press A2 button or A4 button, then will not able to turn on LED light.
Warning: In case of any scald, do not touch LED light, unless hood is closed or cooled.
A0 button: same as above.
Remote sensor: A0 is the remote control.Remote sensor to receive infrared (IR) remote
control signal.
02 series, 05 series and 06 series range hood operating instruction as following:
Function Button: LED light button F1 low speed F2 medium speed F3 high speed
F4 time-delay/on-off F5
Light Button: Power on, press F1 button once, turn on the lights, and again to turn off.
Fan button: When need to open the hood, turn on the power, press F2 button ( low
speed) F3 button(medium speed) F4 button(high speed)